SLiME Tube Protectors

The Slime Tube Protector is a lightweight, durable strip of extruded polyurethane that fits between the tyre and the tube; protecting from thorns, nails and glass.

• NOW 27% STRONGER AND 17% LIGHTER THAN COMPETING BRANDS
• EASY TO INSTALL
• FITS ALL SIZES

Road and Cross Bikes: SL-T1027( Twin Pack)

• 24-26 x 1 3/8
• 27 x 1 1/8 - 1 1/4
• 700 x 28-35
  

BMX and Kid's Bikes: SL-T1520 (Twin Pack)

• 20 x 1.5-1.75 to 20 x 1.9-2.125
  

Mountain Bike 24 inch: SL-T1524 (Twin Pack)

• 24 x 1.5-2.125
  

Mountain Bikes and Cruisers: SL-T1526(Twin Pack)

• 26 x 1.5-1.75 to 26 x 1.9-2.125
  

TO INSTALL SLiME LINER:

1. Remove wheel from bicycle and deflate tube.
   
2. Remove tyre from rim using tyre lever.
   
3. Remove inner tube.
   
4. Lay tyre on ground and insert Slime Liner against tyre. Overlap the ends of the liner. Do not trim liner.
   
5. Reinsert inner tube and slightly inflate. Liner must be between tyre and tube.
   
6. Replace tyre on rim while keeping Slime Liner centered.
   
7. Reinflate tyre to recommended air pressure. Do not overinflate.

*Liners are coated with a mineral oil to prevent the material from sticking to itself. If using tape or other adhesive material to hold liner ends in place, first clean the area with rubbing alcohol to remove surface oil.